Automotive (IATF 16949; Automotive/Production Core Tools) Consulting and Training
Omnex has worked with most of the major Automotive and Truck OEMS and Tier Ones
worldwide. In fact, Omnex has been at the forefront of developing and deploying
all major Automotive OEM initiatives, starting with QOS for the Ford Motor Company
in the early 90s. When Ford wanted to move QOS from a Cost of Quality-based measurable-driven
process to a strategically-driven Customer-Focused process, Omnex assisted them
in developing the QOS methodology and the QOS assessment tool for use by Ford and
Ford Suppliers.
Subsequently, Omnex helped write QS-9000 and Omnex principals performed the first
QS-9000 witness audit worldwide. Omnex collaborated with the Automotive Electronic
Council in rewriting the Semiconductor Supplement to QS-9000 as an IATF 16949-based
standard. Omnex developed and provided the Second Party Auditing Course for AIAG
to Truck OEMs and Automotive Suppliers. Omnex principals are members of the AIAG
writing committees of the SPC, FMEA and MSA Reference Manuals. Omnex is also an
innovator of Lean and Six Sigma by integrating Lean into the Six Sigma methodology.
Omnex is the provider of Lean and Six Sigma worldwide for the Automotive Industry
as the AIAG Provider of Choice. Click here for
more information on Lean and Six Sigma.
It is not hubris that we sometimes call ourselves Inventors of Automotive Quality.
We have had a long association with many OEMs worldwide; from Hyundai in Chennai
to DFM in China to Ford, GM, Mack, and Magna in the USA. For example, Visteon and
Chrysler asked Omnex to conduct Operational Audits with Action Plans to improve
their poorly performing suppliers. At the time, this was known as the 3PSD process
by Chrysler. For Ford Motor Company, we have served the role of keeper of the Q1
Knowledge for Service Organizations, conducting training for Quality and Purchasing
every few years. We are also proud of the role we have played with their global
supply bases starting from Brazil, Venezuela, Argentina, Thailand, India, and Vietnam.
Click here to see how Omnex can assist with
Implementation Support and/or Assessments.
TISAX, CMMC and ISO 27001 Information Security Management System (ISMS)
WP 29, VDA CSMS and ISO/DIS 21434 - Automotive Product Cybersecurity
- New WP.29, ISO21434, and VDA CSMS - Automotive Cybersecurity Management Systems
- New Preparing a Safety Case for Cybersecurity
- New Writing Effective Requirements, Test Cases, and H/S Interfaces for Cybersecurity
- New Introduction to Systems Engineering: A Safety and Cybersecurity Perspective
- New Introduction to Autonomous and Electric Vehicles: A Functional Safety, SOTIF, and Cybersecurity Perspective
- New SAE J3061 and ISO 21434:2020 Automotive Cybersecurity Auditing and Assessment Certification
- New SAE J3061 and ISO 21434:2020 Automotive Cybersecurity Certification
- New SAE J3061, ISO 21434:2020, and Related Standards: Automotive Cybersecurity Executive Overview
- New SAE J3061 and ISO 21434:2020 Conducting a Cybersecurity FMEA and Vulnerability Analysis Testing for Systems, Hardware and Software
- New SAE J3061 and ISO 21434:2020 Cybersecurity Engineering Defense & Protection Against Attacks
- New SAE J3061 and ISO 21434:2020 Cybersecurity Threat Analysis and Risk Assessment (TARA)
- New SAE J3061, ISO/SAE 21434:2020, and Related Standards: Overview for Functional Safety Engineers
IATF 16949:2016
IATF 16949:2016 and Customer-Specific Requirements
Automotive SPICE Training
VDA
Functional Safety Management (ISO 26262)
Automotive/Production Core Tools (APQP, FMEA, PPAP, SPC, MSA)
(This course is broken into modules, allowing specialists to only attend the training
relevant to their responsibilities.)
AIAG-VDA FMEA Training
- New Understanding Core Tools (APQP/PPAP, DFMEA, DVP&R, SPC and MSA) Following the AIAG FMEA 4th Edition Methodology
- New Understanding Core Tools (APQP/PPAP, PFMEA, Control Plans, SPC and MSA) Following the AIAG FMEA 4th Edition Methodology
- New Understanding Core Tools (APQP/PPAP, DFMEA, DVP&R, SPC and MSA) Following the AIAG-VDA FMEA 1st Edition Methodology
- New Understanding Core Tools (APQP/PPAP, PFMEA, Control Plans, SPC and MSA) Following the AIAG-VDA FMEA 1st Edition Methodology
-
New AIAG-VDA DFMEA (SFMEA and DFMEA) for Practitioners and Facilitators
-
New AIAG-VDA FMEA for Managers and Implementers – Implementation Training
-
New AIAG-VDA FMEA Understanding, Implications, and Strategy Executive Overview
-
New AIAG-VDA Process FMEA and Control Plans for Practitioners and Facilitators
-
New AIAG-VDA MSR
DFMEA Training
Problem Solving
Continuous Quality Improvement (CQI)
Integrated Management Systems
Job Instruction
ISO/PAS 21448:2019 (SOTIF)
Integrated Management Systems
Integrated Management Systems (IMS) is the integration of QMS,
EMS, OHSAS and other regulations / standards and requirements into a single management
system. IMS fosters the approach that an organization should establish one integrated
system that is best for the business and not set up separate, often duplicate, processes
or documentation to satisfy each management standard. IMS contains company-wide
processes that conform to various management system standards such as AS9100, IATF
16949, ISO 22000, ISO 9001, ISO 14001, and ISO 45001 but are primarily established
in support of the business goals.
At Omnex, integration means developing common organizational processes based on
standardized work flows, conducting integrated risk analysis (using FMEAs and Control
Plans for quality, environmental and health and safety risks) and conducting integrated
audits. At Omnex, we are continuing to pioneer ever more effective and efficient
ways of defining, implementing and auditing integrated management systems.
Integration and standardization not only reduce confusion and redundancy in the
workplace, but cost an estimated 50% less to implement and most importantly cost
50% less to maintain. Furthermore, the cost for registration is reduced by as much
as 33%.
Omnex has been implementing integrated management systems since the 1990s, beginning
with the integration of QS-9000 and ISO 14001 in the Americas for Yazaki. Since
then, we have integrated ISO 9001, ISO 14001 and OHSAS 18001 for organizations around
the world including General Motors and TRW. Lately, we have integrated ISO 9001
and Food Safety Management Systems including an implementation where Food Safety,
Quality (ISO 9001), Environmental (ISO 14001), and Health and Safety (ISO 45001)
were integrated into one management system. Omnex recently helped Swiss Colony a
100 year-old Food Catalog and Bakery implement FSMS and QMS standards in a record
six months that included QOS/BOS and Phase Gate New Product Development methodologies
and 8D Problem Solving techniques.
Omnex provides training for top management in the understanding and integration
of multiple integrated management systems, as well as the worlds only lead auditor
course in Integrated Management Systems (ISO 9001, ISO 14001 and ISO 45001).
Click here for
more information on Omnexs approach to Integrated Management Systems
Omnex Methodologies and Practices
Omnex offers training for each of the different methodologies
as shown in this link. Keep in mind, some of these methodologies may be known by
different names within the industry.
Omnex specializes in the following methodologies:
Implementation Support
Click here to view Omnex Training and Workshop Offerings
Omnex can help you conduct an IATF 16949 or ISO 26262 Discovery Analysis (or
Assessment) or conduct a Best-In-Class assessment to assist your company
in making process improvements that results in efficiency and savings.
Omnex will conduct a Discovery Analysis during an initial assessment. Omnex will
study your current processes to see the gaps in the systems as well as review Best-In-Class
practices depending on the scope of the assessment. Omnex assessments always focus
on savings and improvements within the organization. The last day of the assessment
centers around feedback and planning with the customer team. An implementation plan,
customer/Omnex team, and next steps are completed as a part of the Discovery. A
discovery analysis or assessment can be done for process improvement, for new or
revised standards, or when the customer is ready for an overhaul of their systems.
Omnex core strengths are spelled out in the 12 methodologies in which
we specialize. Each of these practices are best in Class practices that
can be implemented based on the needs of a specific organization in any industry.
Let us know how we can help you!
|
|
AIAG-VDA FMEA Training
Quick Links
IATF 16949 Attendee Comments
"The Omnex training material was comprehensive and easy to understand. It has provided
me with the needed knowledge to help make my company a successful operation." -
David Carney
more...
IATF 16949 Customers
Acco Controls
Autotek Industries
Benchmark Technologies
Bertrand Faure Components Ltd.
Cosma International
more...
IATF 16949:2016 Case Studies
|
|