SAE J3061 and ISO 21434:2019 Automotive Cybersecurity Executive Overview
Home > ISO Training > ISO 21434:2019 Automotive Cybersecurity Executive Overview
Seminar Content
This one-day course will give the participant the base knowledge necessary for management teams involved in the development and assurance of automotive cybersecurity of new products utilizing electrical and electronic elements through the use of the ISO/SAE 21434 Cybersecurity Management System standard. This standard is an adaptation of several frameworks and related standards for the specifics of automotive electric/electronic systems. It is to be applied to Cybersecurity Related Systems that include electric/electronic systems that are installed in production passenger vehicles.
Who Should Attend
This course is designed for executive management.
Recommended Training and/or Experience
Attendees should have a working knowledge of their organization’s New Product Development Process.
Seminar Materials
Each participant will receive a seminar manual including case studies.
Seminar Goals
- Identify the purpose and scope of ISO 21434
- Describe the framework of the ISO 21434 standard
- Enumerate the 14 parts of the standard
- Identify the influences and drivers of the standard
- Be able to interpret ISO 21434 CAL tables
- Understand key aspects of cybersecurity management
- Identify the requirements for the organization after the release of the design to serial production
- Describe the impact of ISO 21434 on production and operational activities
- Enumerate the requirements of ISO 26262 which support the design and development activities for automotive cybersecurity
- Describe the requirements for distributed development
- Organize the development of a CSooC consistent with
ISO 21434
- Describe the item definition and initiate the safety lifecycle
- Understand the development of the Threat analysis and risk assessment and the related cybersecurity goals including the cybersecurity concept and the refined cybersecurity design.
Seminar Outline
- Introduction and Overview to SAE J3061 and ISO 21434
- ISO 21434 Purpose, Scope and Framework
- Overall Cybersecurity Management (Clause 5)
- Cybersecurity Governance
- Cybersecurity Culture
- Cybersecurity Risk Management
- Cybersecurity Audit
- Information sharing
- Confirmation Measures
- Project Dependent Cybersecurity Management (Clause 6)
- Tailoring of Cybersecurity Activities
- System or Component out of Context
- Cybersecurity Planning
- Cybersecurity Case
- Post-Development Phases (Clauses 10-13)
- Production, Operation, Maintenance, and Decommissioning
- Concept Phase (Clause 8)
- Cybersecurity Relevance
- Item Definition
- Threat Analysis and Risk Assessment (TARA)
- Cybersecurity Concept
- Product Development (Clause 9.1)
- Introduction to Design & Verification
- Refined Cybersecurity Design
- The Need for Cybersecurity and Getting Started
Note: The materials will include SAE J3061 content as applicable.
Related Courses
|
Advanced Statistical Process Control (SPC)
|
Manufacturing Process Development using PFMEA (Process Flow, PFMEA, Control Plan, Part & Process Approval)
|
Basic Statistical Process Control (SPC)
|
Understanding Core Tools - (APQP, PPAP, DFMEA, DVP&R, PFMEA, Control Plan, SPC and MSA)
|
FMEA 4th Edition Update
|
Implementing MMOG with IATF 16949:2016
|
Measurement Systems Analysis (MSA) and Advanced Analysis (ANOVA)
|
Production Part Approval Process (PPAP) Workshop with IATF 16949:2016
|
Total Productive Maintenance (TPM)
|
Understanding Core Tools - APQP & PPAP
|
Understanding Core Tools - DFMEA & DVP&R
|
Understanding Core Tools - PFMEA & Control Plan
|
Understanding Core Tools - Statistical Process Control (SPC)
|
Understanding Core Tools - Measurement Systems Analysis (MSA)
|
Production Part Approval Process (PPAP 4th Edition)
|
APQP, FMEA and Control Plans (New Revision)
|
APQP 2nd Edition
|
Effective Problem Solving
|
7QC
|
APQP/PPAP
|
Machine Failure Mode Effect Analysis (MFMEA)
|
Understanding AIAG Sub-tier Supplier Management (CQI-19)
|
Advanced Product Quality Planning (APQP) Overview
|
Understanding the Five Phases of APQP
|
APQP Manufacturing Process Development using PFMEA and PPAP
|
Product Development using SFMEA, DFMEA and Associated Tools
|
Measurement Systems Analysis(MSA) and Statistical Process Control (SPC)
|
Conducting Internal and Supplier (Second Party) Audits to Automotive SPICE
|
AIAG-VDA Product FMEA Overview
|
SAE J3061 and ISO 21434:2019 Automotive Cybersecurity Certification
|
AIAG-VDA DFMEA (SFMEA and DFMEA) for Practitioners and Facilitators
|
AIAG-VDA FMEA for Managers and Implementers – Implementation Training
|
AIAG-VDA FMEA Understanding, Implications, and Strategy Executive Overview
|
AIAG-VDA Process FMEA and Control Plans for Practitioners and Facilitators
|
Understanding AIAG-VDA DFMEA (SFMEA and DFMEA) for Design and Project Team Members
|
Understanding AIAG-VDA Process FMEA and Control Plans for Process and Project Team Members
|
Product Integrity for the Product Safety & Conformance Representative (PSCR)
|
SAE J3061 and ISO/SAE 21434:2019 Overview for Functional Safety Engineers
|
SAE J3061 and ISO 21434:2019 Cybersecurity Engineering Defense & Protection Against Attacks
|
SAE J3061 and ISO 21434:2019 Automotive Cybersecurity Auditing and Assessment Certification
|
SAE J3061 and ISO 21434:2019 Conducting a Cybersecurity FMEA and Vulnerability Analysis Testing for Systems, Hardware and Software
|
SAE J3061 and ISO 21434:2019 Cybersecurity Threat Analysis and Risk Assessment (TARA)
|
Introduction to Autonomous and Electric Vehicles: A Functional Safety, SOTIF, and Cybersecurity Perspective
|
Reverse Failure Mode and Effect Analysis – RFMEA
|
Introduction to Systems Engineering: A Safety and Cybersecurity Perspective
|
Writing Effective Requirements, Test Cases, and H/S Interfaces for Cybersecurity
|
Preparing a Cybersecurity Case
|
Transitioning to BS VI Understanding and Strategising
|
Root Cause Analysis (RCA) - AIAG Approved
|
Minitab Tools- AIAG Approved
|
Multipoint DFMEA for Mechatronic and Electronic Systems using AIAG FMEA 4th Edition
|
Writing Effective Requirements and Test Cases for Automotive Software Performance Improvement and Capability Determination (ASPICE) and HWE PRM/PAM
|
Writing Effective Requirements and Test Cases
|
Multipoint DFMEA for Mechatronic and Electronic Systems using the AIAG-VDA FMEA Handbook Methodology
|
Understanding Core Tools (APQP/PPAP, DFMEA, DVP&R, SPC and MSA) Following the AIAG FMEA 4th Edition Methodology
|
Understanding Core Tools (APQP/PPAP, PFMEA, Control Plans, SPC and MSA) Following the AIAG FMEA 4th Edition Methodology
|
Understanding Core Tools (APQP/PPAP, DFMEA, DVP&R, SPC and MSA) Following the AIAG-VDA FMEA 1st Edition Methodology
|
Understanding Core Tools (APQP/PPAP, PFMEA, Control Plans, SPC and MSA) Following the AIAG-VDA FMEA 1st Edition Methodology
|
Related Courses
|
Advanced Statistical Process Control (SPC)
|
Manufacturing Process Development using PFMEA (Process Flow, PFMEA, Control Plan, Part & Process Approval)
|
Basic Statistical Process Control (SPC)
|
Understanding Core Tools - (APQP, PPAP, DFMEA, DVP&R, PFMEA, Control Plan, SPC and MSA)
|
FMEA 4th Edition Update
|
Implementing MMOG with IATF 16949:2016
|
Measurement Systems Analysis (MSA) and Advanced Analysis (ANOVA)
|
Production Part Approval Process (PPAP) Workshop with IATF 16949:2016
|
Total Productive Maintenance (TPM)
|
Understanding Core Tools - APQP & PPAP
|
Understanding Core Tools - DFMEA & DVP&R
|
Understanding Core Tools - PFMEA & Control Plan
|
Understanding Core Tools - Statistical Process Control (SPC)
|
Understanding Core Tools - Measurement Systems Analysis (MSA)
|
Production Part Approval Process (PPAP 4th Edition)
|
APQP, FMEA and Control Plans (New Revision)
|
APQP 2nd Edition
|
Effective Problem Solving
|
7QC
|
APQP/PPAP
|
Machine Failure Mode Effect Analysis (MFMEA)
|
Understanding AIAG Sub-tier Supplier Management (CQI-19)
|
Advanced Product Quality Planning (APQP) Overview
|
Understanding the Five Phases of APQP
|
APQP Manufacturing Process Development using PFMEA and PPAP
|
Product Development using SFMEA, DFMEA and Associated Tools
|
Measurement Systems Analysis(MSA) and Statistical Process Control (SPC)
|
Conducting Internal and Supplier (Second Party) Audits to Automotive SPICE
|
AIAG-VDA Product FMEA Overview
|
SAE J3061 and ISO 21434:2019 Automotive Cybersecurity Certification
|
AIAG-VDA DFMEA (SFMEA and DFMEA) for Practitioners and Facilitators
|
AIAG-VDA FMEA for Managers and Implementers – Implementation Training
|
AIAG-VDA FMEA Understanding, Implications, and Strategy Executive Overview
|
AIAG-VDA Process FMEA and Control Plans for Practitioners and Facilitators
|
Understanding AIAG-VDA DFMEA (SFMEA and DFMEA) for Design and Project Team Members
|
Understanding AIAG-VDA Process FMEA and Control Plans for Process and Project Team Members
|
Product Integrity for the Product Safety & Conformance Representative (PSCR)
|
SAE J3061 and ISO/SAE 21434:2019 Overview for Functional Safety Engineers
|
SAE J3061 and ISO 21434:2019 Cybersecurity Engineering Defense & Protection Against Attacks
|
SAE J3061 and ISO 21434:2019 Automotive Cybersecurity Auditing and Assessment Certification
|
SAE J3061 and ISO 21434:2019 Conducting a Cybersecurity FMEA and Vulnerability Analysis Testing for Systems, Hardware and Software
|
SAE J3061 and ISO 21434:2019 Cybersecurity Threat Analysis and Risk Assessment (TARA)
|
Introduction to Autonomous and Electric Vehicles: A Functional Safety, SOTIF, and Cybersecurity Perspective
|
Reverse Failure Mode and Effect Analysis – RFMEA
|
Introduction to Systems Engineering: A Safety and Cybersecurity Perspective
|
Writing Effective Requirements, Test Cases, and H/S Interfaces for Cybersecurity
|
Preparing a Cybersecurity Case
|
Transitioning to BS VI Understanding and Strategising
|
Root Cause Analysis (RCA) - AIAG Approved
|
Minitab Tools- AIAG Approved
|
Multipoint DFMEA for Mechatronic and Electronic Systems using AIAG FMEA 4th Edition
|
Writing Effective Requirements and Test Cases for Automotive Software Performance Improvement and Capability Determination (ASPICE) and HWE PRM/PAM
|
Writing Effective Requirements and Test Cases
|
Multipoint DFMEA for Mechatronic and Electronic Systems using the AIAG-VDA FMEA Handbook Methodology
|
Understanding Core Tools (APQP/PPAP, DFMEA, DVP&R, SPC and MSA) Following the AIAG FMEA 4th Edition Methodology
|
Understanding Core Tools (APQP/PPAP, PFMEA, Control Plans, SPC and MSA) Following the AIAG FMEA 4th Edition Methodology
|
Understanding Core Tools (APQP/PPAP, DFMEA, DVP&R, SPC and MSA) Following the AIAG-VDA FMEA 1st Edition Methodology
|
Understanding Core Tools (APQP/PPAP, PFMEA, Control Plans, SPC and MSA) Following the AIAG-VDA FMEA 1st Edition Methodology
|

|
|