
Understanding Core Tools: Advance Product Quality Planning (APQP) and Production Part Approval Process (PPAP)
Seminar Content
This one-day overview addresses all the elements of Advance Product Quality Planning (APQP) and defines it as a process in your organization. It provides an overview of the five phases of APQP and how it is managed as a process in the planning, development and launch of new products and processes. It also details Production Part Approval Process (PPAP) as the culmination of the APQP process and provides an overview of PPAP requirements.
The approaches discussed and employed in this course are consistent with the intent and guidelines in the APQP 2nd Edition and PPAP 4th Edition manuals issued by GM, Ford and FCA through the AIAG.
Who Should Attend
- Program Managers
- Design, Quality, and Manufacturing Engineers
- Persons who have direct responsibility for preparation, assembly or review of PPAP components or packages.
- Auditors and those responsible for subcontractor PPAP documentation.
Recommended Training and/or Experience
Participants should possess a general knowledge of quality systems.
Seminar Materials
Each participant will receive a seminar manual that includes breakout exercises.
Seminar Goals
- Understand the five phases of APQP for New Product Development and its relationship to program management and the knowledge and skills needed to participate in an APQP team
- Understand the PPAP protocol, elements, deliverables and submission/approval process
Seminar Outline
- APQP Overview
- The Five APQP Phases
- Concurrent Engineering
- APQP and IATF 16949
- The Five APQP Phases
- Phase I – Planning
- Phase II – Product Design & Development
- Phase III – Process Design & Development
- Phase IV – Product & Process Validation
- Phase V – Feedback Assessment & Corrective Action
- PPAP
- PPAP Elements
- PPAP Submission Levels
- Part Submission Warrant (PSW)
- Assessing Process Readiness and PPAP
|
Related Courses
|
Advanced Statistical Process Control (SPC)
|
Manufacturing Process Development using PFMEA (Process Flow, PFMEA, Control Plan, Part & Process Approval)
|
Basic Statistical Process Control (SPC)
|
Understanding Core Tools - (APQP, PPAP, DFMEA, DVP&R, PFMEA, Control Plan, SPC and MSA)
|
FMEA 4th Edition Update
|
Implementing MMOG with IATF 16949:2016
|
Measurement Systems Analysis (MSA) and Advanced Analysis (ANOVA)
|
Production Part Approval Process (PPAP) Workshop with IATF 16949:2016
|
Total Productive Maintenance (TPM)
|
Understanding Core Tools - DFMEA & DVP&R
|
Understanding Core Tools - PFMEA & Control Plan
|
Understanding Core Tools - Statistical Process Control (SPC)
|
Understanding Core Tools - Measurement Systems Analysis (MSA)
|
Production Part Approval Process (PPAP 4th Edition)
|
APQP, FMEA and Control Plans (New Revision)
|
APQP 2nd Edition
|
Effective Problem Solving
|
7QC
|
APQP/PPAP
|
Machine Failure Mode Effect Analysis (MFMEA)
|
Understanding AIAG Sub-tier Supplier Management (CQI-19)
|
Advanced Product Quality Planning (APQP) Overview
|
Understanding the Five Phases of APQP
|
APQP Manufacturing Process Development using PFMEA and PPAP
|
Product Development using SFMEA, DFMEA and Associated Tools
|
Measurement Systems Analysis(MSA) and Statistical Process Control (SPC)
|
Conducting Internal and Supplier (Second Party) Audits to Automotive SPICE
|
AIAG-VDA Product FMEA Overview
|
SAE J3061 and ISO 21434:2019 Automotive Cybersecurity Certification
|
AIAG-VDA DFMEA (SFMEA and DFMEA) for Practitioners and Facilitators
|
AIAG-VDA FMEA for Managers and Implementers – Implementation Training
|
AIAG-VDA FMEA Understanding, Implications, and Strategy Executive Overview
|
AIAG-VDA Process FMEA and Control Plans for Practitioners and Facilitators
|
Understanding AIAG-VDA DFMEA (SFMEA and DFMEA) for Design and Project Team Members
|
Understanding AIAG-VDA Process FMEA and Control Plans for Process and Project Team Members
|
Product Integrity for the Product Safety & Conformance Representative (PSCR)
|
SAE J3061 and ISO 21434:2019 Automotive Cybersecurity Executive Overview
|
SAE J3061 and ISO/SAE 21434:2019 Overview for Functional Safety Engineers
|
SAE J3061 and ISO 21434:2019 Cybersecurity Engineering Defense & Protection Against Attacks
|
SAE J3061 and ISO 21434:2019 Automotive Cybersecurity Auditing and Assessment
|
SAE J3061 and ISO 21434:2019 Conducting a Cybersecurity FMEA and Vulnerability Analysis Testing for Systems, Hardware and Software
|
SAE J3061 and ISO 21434:2019 Cybersecurity Threat Analysis and Risk Assessment (TARA)
|
Introduction to Autonomous and Electric Vehicles: A Functional Safety, SOTIF, and Cybersecurity Perspective
|
Reverse Failure Mode and Effect Analysis – RFMEA
|
Introduction to Systems Engineering: A Safety and Cybersecurity Perspective
|
Writing Effective Requirements, Test Cases, and H/S Interfaces for Cybersecurity
|
Preparing a Safety Case for Cybersecurity
|
Related Courses
|
Advanced Statistical Process Control (SPC)
|
Manufacturing Process Development using PFMEA (Process Flow, PFMEA, Control Plan, Part & Process Approval)
|
Basic Statistical Process Control (SPC)
|
Understanding Core Tools - (APQP, PPAP, DFMEA, DVP&R, PFMEA, Control Plan, SPC and MSA)
|
FMEA 4th Edition Update
|
Implementing MMOG with IATF 16949:2016
|
Measurement Systems Analysis (MSA) and Advanced Analysis (ANOVA)
|
Production Part Approval Process (PPAP) Workshop with IATF 16949:2016
|
Total Productive Maintenance (TPM)
|
Understanding Core Tools - DFMEA & DVP&R
|
Understanding Core Tools - PFMEA & Control Plan
|
Understanding Core Tools - Statistical Process Control (SPC)
|
Understanding Core Tools - Measurement Systems Analysis (MSA)
|
Production Part Approval Process (PPAP 4th Edition)
|
APQP, FMEA and Control Plans (New Revision)
|
APQP 2nd Edition
|
Effective Problem Solving
|
7QC
|
APQP/PPAP
|
Machine Failure Mode Effect Analysis (MFMEA)
|
Understanding AIAG Sub-tier Supplier Management (CQI-19)
|
Advanced Product Quality Planning (APQP) Overview
|
Understanding the Five Phases of APQP
|
APQP Manufacturing Process Development using PFMEA and PPAP
|
Product Development using SFMEA, DFMEA and Associated Tools
|
Measurement Systems Analysis(MSA) and Statistical Process Control (SPC)
|
Conducting Internal and Supplier (Second Party) Audits to Automotive SPICE
|
AIAG-VDA Product FMEA Overview
|
SAE J3061 and ISO 21434:2019 Automotive Cybersecurity Certification
|
AIAG-VDA DFMEA (SFMEA and DFMEA) for Practitioners and Facilitators
|
AIAG-VDA FMEA for Managers and Implementers – Implementation Training
|
AIAG-VDA FMEA Understanding, Implications, and Strategy Executive Overview
|
AIAG-VDA Process FMEA and Control Plans for Practitioners and Facilitators
|
Understanding AIAG-VDA DFMEA (SFMEA and DFMEA) for Design and Project Team Members
|
Understanding AIAG-VDA Process FMEA and Control Plans for Process and Project Team Members
|
Product Integrity for the Product Safety & Conformance Representative (PSCR)
|
SAE J3061 and ISO 21434:2019 Automotive Cybersecurity Executive Overview
|
SAE J3061 and ISO/SAE 21434:2019 Overview for Functional Safety Engineers
|
SAE J3061 and ISO 21434:2019 Cybersecurity Engineering Defense & Protection Against Attacks
|
SAE J3061 and ISO 21434:2019 Automotive Cybersecurity Auditing and Assessment
|
SAE J3061 and ISO 21434:2019 Conducting a Cybersecurity FMEA and Vulnerability Analysis Testing for Systems, Hardware and Software
|
SAE J3061 and ISO 21434:2019 Cybersecurity Threat Analysis and Risk Assessment (TARA)
|
Introduction to Autonomous and Electric Vehicles: A Functional Safety, SOTIF, and Cybersecurity Perspective
|
Reverse Failure Mode and Effect Analysis – RFMEA
|
Introduction to Systems Engineering: A Safety and Cybersecurity Perspective
|
Writing Effective Requirements, Test Cases, and H/S Interfaces for Cybersecurity
|
Preparing a Safety Case for Cybersecurity
|

|
|
Upcoming Training
Click a date to register
United States of America
|
Jan 27, 2020-Ann Arbor, MI
|
Feb 17, 2020-Greenville, SC
|
Feb 17, 2020-San Jose, CA
|
Mar 16, 2020-Ann Arbor, MI
|
Apr 20, 2020-Greenville, SC
|
Apr 20, 2020-San Jose, CA
|
May 11, 2020-Ann Arbor, MI
|
Jun 15, 2020-Greenville, SC
|
Jul 20, 2020-Ann Arbor, MI
|
Sep 21, 2020-Greenville, SC
|
Sep 21, 2020-San Jose, CA
|
Sep 28, 2020-Ann Arbor, MI
|
Nov 02, 2020-Ann Arbor, MI
|
Nov 30, 2020-Greenville, SC
|
Canada
|
Jan 27, 2020-Mississauga, ON
|
Mar 16, 2020-Mississauga, ON
|
May 11, 2020-Mississauga, ON
|
Jul 20, 2020-Mississauga, ON
|
Sep 28, 2020-Mississauga, ON
|
Nov 02, 2020-Mississauga, ON
|
Mexico
|
Feb 17, 2020-Monterrey
|
Feb 17, 2020-Mexico City
|
Apr 27, 2020-Mexico City
|
Apr 27, 2020-Monterrey
|
Jun 22, 2020-Monterrey
|
Jun 22, 2020-Mexico City
|
Aug 17, 2020-Mexico City
|
Aug 17, 2020-Monterrey
|
Oct 26, 2020-Monterrey
|
Oct 26, 2020-Mexico City
|
|
Provide course at my site
|
Tell Me About Future Dates
|
Click a date to register
|
|