AIAG-VDA FMEA Understanding, Implications, and Strategy Executive Overview
Home > Training > AIAG-VDA FMEA Training > AIAG-VDA FMEA Understanding, Implications, and Strategy Executive Overview
Seminar Content
Join Omnex for this important industry approach integrating AIAG and VDA FMEAs. Omnex FMEA experts many who are writers of the FMEA standards have worked extensively with both AIAG and VDA FMEAs formats. They will show you how to manage your existing AIAG or VDA FMEAs and the steps to transition to the AIAG-VDA FMEA approach.
This half-day or 1 day seminar will provide a high-level review of the changes in the new AIAG-VDA FMEA and the requirements and recommendations for top management.
The approaches discussed and employed in this course are consistent with the intent and guidelines in the AIAG-VDA FMEA Handbook (1st edition, 2019) issued by AIAG and VDA.
Who Should Attend
Top Management and their direct reports including Quality Leadership and AIAG-VDA FMEA Implementation Leader.
Recommended Training and/or Experience
No prior knowledge is necessary.
Seminar Materials
Each participant will receive a seminar manual and a Getting Started Checklist. The session will develop a company specific action plan.
Seminar Goals & Objectives
- Understanding of the AIAG-VDA FMEA approach and changes to the previous approaches used by the organization. Provide top management and other key management understanding on the strategic implications with the AIAG-VDA FMEA and Supply Chain standards evolving out of the industry shift from Gas and Diesel mechanical vehicles to Electric and Autonomous Vehicles.
- Importance of the Supply Chain and how these standards link the supply chain.
- Requirements flow down the supply chain.
- Software to support a 3 dimensional FMEA structure and requirements flow down.
- Design Reuse and product family/process family orientation.
- Linkage of failure databases and the AIAG-VDA FMEA and reduction of PPM (Cost of Quality).
- Linkages between System, Sub System, Components and Assembly and Manufacturing Processes.
Seminar Outline
- What has changed in the AIAG-VDA FMEA vs the 4th Edition
- The Seven Steps of the AIAG-VDA FMEA DFMEA and PFMEA
- Implications of the change to the organization and Supply Chain
- o What are Supply Chain Standards and why they are important
- Requirements Management for AIAG-VDA FMEA
- Software needs with AIAG-VDA FMEA
- o AIAG 4th Edition is 2 dimensional and AIAG-VDA FMEA is 3 Dimensional
- o Reuse of Information and Products/Process Families and Continual Improvement
- Linkages of SFMEA, DFMEA, and PFMEA including PPAP
- Change Management and FMEA Updates
- PPM Defect history, Cost of Poor Quality and FMEA linkages
- Getting Started Checklist and Action Plan
|
Related Courses
|
Advanced Statistical Process Control (SPC)
|
Manufacturing Process Development using PFMEA (Process Flow, PFMEA, Control Plan, Part & Process Approval)
|
Basic Statistical Process Control (SPC)
|
Understanding Core Tools - (APQP, PPAP, DFMEA, DVP&R, PFMEA, Control Plan, SPC and MSA)
|
FMEA 4th Edition Update
|
Implementing MMOG with IATF 16949:2016
|
Measurement Systems Analysis (MSA) and Advanced Analysis (ANOVA)
|
Production Part Approval Process (PPAP) Workshop with IATF 16949:2016
|
Total Productive Maintenance (TPM)
|
Understanding Core Tools - APQP & PPAP
|
Understanding Core Tools - DFMEA & DVP&R
|
Understanding Core Tools - PFMEA & Control Plan
|
Understanding Core Tools - Statistical Process Control (SPC)
|
Understanding Core Tools - Measurement Systems Analysis (MSA)
|
Production Part Approval Process (PPAP 4th Edition)
|
APQP, FMEA and Control Plans (New Revision)
|
APQP 2nd Edition
|
Effective Problem Solving
|
7QC
|
APQP/PPAP
|
Machine Failure Mode Effect Analysis (MFMEA)
|
Understanding AIAG Sub-tier Supplier Management (CQI-19)
|
Advanced Product Quality Planning (APQP) Overview
|
Understanding the Five Phases of APQP
|
APQP Manufacturing Process Development using PFMEA and PPAP
|
Product Development using SFMEA, DFMEA and Associated Tools
|
Measurement Systems Analysis(MSA) and Statistical Process Control (SPC)
|
Conducting Internal and Supplier (Second Party) Audits to Automotive SPICE
|
AIAG-VDA Product FMEA Overview
|
SAE J3061 and ISO 21434:2020 Automotive Cybersecurity Certification
|
AIAG-VDA DFMEA (SFMEA and DFMEA) for Practitioners and Facilitators
|
AIAG-VDA FMEA for Managers and Implementers – Implementation Training
|
AIAG-VDA Process FMEA and Control Plans for Practitioners and Facilitators
|
Understanding AIAG-VDA DFMEA (SFMEA and DFMEA) for Design and Project Team Members
|
Understanding AIAG-VDA Process FMEA and Control Plans for Process and Project Team Members
|
Product Integrity for the Product Safety & Conformance Representative (PSCR)
|
SAE J3061, ISO 21434:2020, and Related Standards: Automotive Cybersecurity Executive Overview
|
SAE J3061,ISO/SAE 21434:2020, and Related Standards: Overview for Functional Safety Engineers
|
SAE J3061 and ISO 21434:2020 Cybersecurity Engineering Defense & Protection Against Attacks
|
SAE J3061 and ISO 21434:2020 Automotive Cybersecurity Auditing and Assessment Certification
|
SAE J3061 and ISO 21434:2020 Conducting a Cybersecurity FMEA and Vulnerability Analysis Testing for Systems, Hardware and Software
|
SAE J3061 and ISO 21434:2020 Cybersecurity Threat Analysis and Risk Assessment (TARA)
|
Introduction to Autonomous and Electric Vehicles: A Functional Safety, SOTIF, and Cybersecurity Perspective
|
Reverse Failure Mode and Effect Analysis – RFMEA
|
Introduction to Systems Engineering: A Safety and Cybersecurity Perspective
|
Writing Effective Requirements, Test Cases, and H/S Interfaces for Cybersecurity
|
Preparing a Cybersecurity Case
|
Transitioning to BS VI Understanding and Strategising
|
Root Cause Analysis (RCA) - AIAG Approved
|
Minitab Tools- AIAG Approved
|
Multipoint DFMEA for Mechatronic and Electronic Systems using AIAG FMEA 4th Edition
|
Writing Effective Requirements and Test Cases for Automotive Software Performance Improvement and Capability Determination (ASPICE) and HWE PRM/PAM
|
Writing Effective Requirements and Test Cases
|
Multipoint DFMEA for Mechatronic and Electronic Systems using the AIAG-VDA FMEA Handbook Methodology
|
Understanding Core Tools (APQP/PPAP, DFMEA, DVP&R, SPC and MSA) Following the AIAG FMEA 4th Edition Methodology
|
Understanding Core Tools (APQP/PPAP, PFMEA, Control Plans, SPC and MSA) Following the AIAG FMEA 4th Edition Methodology
|
Understanding Core Tools (APQP/PPAP, DFMEA, DVP&R, SPC and MSA) Following the AIAG-VDA FMEA 1st Edition Methodology
|
Understanding Core Tools (APQP/PPAP, PFMEA, Control Plans, SPC and MSA) Following the AIAG-VDA FMEA 1st Edition Methodology
|
WP.29, ISO21434, and VDA CSMS - Automotive Cybersecurity Management Systems
|
Mechanical Engineering Plug-In for ASPICE
|
Related Courses
|
Advanced Statistical Process Control (SPC)
|
Manufacturing Process Development using PFMEA (Process Flow, PFMEA, Control Plan, Part & Process Approval)
|
Basic Statistical Process Control (SPC)
|
Understanding Core Tools - (APQP, PPAP, DFMEA, DVP&R, PFMEA, Control Plan, SPC and MSA)
|
FMEA 4th Edition Update
|
Implementing MMOG with IATF 16949:2016
|
Measurement Systems Analysis (MSA) and Advanced Analysis (ANOVA)
|
Production Part Approval Process (PPAP) Workshop with IATF 16949:2016
|
Total Productive Maintenance (TPM)
|
Understanding Core Tools - APQP & PPAP
|
Understanding Core Tools - DFMEA & DVP&R
|
Understanding Core Tools - PFMEA & Control Plan
|
Understanding Core Tools - Statistical Process Control (SPC)
|
Understanding Core Tools - Measurement Systems Analysis (MSA)
|
Production Part Approval Process (PPAP 4th Edition)
|
APQP, FMEA and Control Plans (New Revision)
|
APQP 2nd Edition
|
Effective Problem Solving
|
7QC
|
APQP/PPAP
|
Machine Failure Mode Effect Analysis (MFMEA)
|
Understanding AIAG Sub-tier Supplier Management (CQI-19)
|
Advanced Product Quality Planning (APQP) Overview
|
Understanding the Five Phases of APQP
|
APQP Manufacturing Process Development using PFMEA and PPAP
|
Product Development using SFMEA, DFMEA and Associated Tools
|
Measurement Systems Analysis(MSA) and Statistical Process Control (SPC)
|
Conducting Internal and Supplier (Second Party) Audits to Automotive SPICE
|
AIAG-VDA Product FMEA Overview
|
SAE J3061 and ISO 21434:2020 Automotive Cybersecurity Certification
|
AIAG-VDA DFMEA (SFMEA and DFMEA) for Practitioners and Facilitators
|
AIAG-VDA FMEA for Managers and Implementers – Implementation Training
|
AIAG-VDA Process FMEA and Control Plans for Practitioners and Facilitators
|
Understanding AIAG-VDA DFMEA (SFMEA and DFMEA) for Design and Project Team Members
|
Understanding AIAG-VDA Process FMEA and Control Plans for Process and Project Team Members
|
Product Integrity for the Product Safety & Conformance Representative (PSCR)
|
SAE J3061, ISO 21434:2020, and Related Standards: Automotive Cybersecurity Executive Overview
|
SAE J3061,ISO/SAE 21434:2020, and Related Standards: Overview for Functional Safety Engineers
|
SAE J3061 and ISO 21434:2020 Cybersecurity Engineering Defense & Protection Against Attacks
|
SAE J3061 and ISO 21434:2020 Automotive Cybersecurity Auditing and Assessment Certification
|
SAE J3061 and ISO 21434:2020 Conducting a Cybersecurity FMEA and Vulnerability Analysis Testing for Systems, Hardware and Software
|
SAE J3061 and ISO 21434:2020 Cybersecurity Threat Analysis and Risk Assessment (TARA)
|
Introduction to Autonomous and Electric Vehicles: A Functional Safety, SOTIF, and Cybersecurity Perspective
|
Reverse Failure Mode and Effect Analysis – RFMEA
|
Introduction to Systems Engineering: A Safety and Cybersecurity Perspective
|
Writing Effective Requirements, Test Cases, and H/S Interfaces for Cybersecurity
|
Preparing a Cybersecurity Case
|
Transitioning to BS VI Understanding and Strategising
|
Root Cause Analysis (RCA) - AIAG Approved
|
Minitab Tools- AIAG Approved
|
Multipoint DFMEA for Mechatronic and Electronic Systems using AIAG FMEA 4th Edition
|
Writing Effective Requirements and Test Cases for Automotive Software Performance Improvement and Capability Determination (ASPICE) and HWE PRM/PAM
|
Writing Effective Requirements and Test Cases
|
Multipoint DFMEA for Mechatronic and Electronic Systems using the AIAG-VDA FMEA Handbook Methodology
|
Understanding Core Tools (APQP/PPAP, DFMEA, DVP&R, SPC and MSA) Following the AIAG FMEA 4th Edition Methodology
|
Understanding Core Tools (APQP/PPAP, PFMEA, Control Plans, SPC and MSA) Following the AIAG FMEA 4th Edition Methodology
|
Understanding Core Tools (APQP/PPAP, DFMEA, DVP&R, SPC and MSA) Following the AIAG-VDA FMEA 1st Edition Methodology
|
Understanding Core Tools (APQP/PPAP, PFMEA, Control Plans, SPC and MSA) Following the AIAG-VDA FMEA 1st Edition Methodology
|
WP.29, ISO21434, and VDA CSMS - Automotive Cybersecurity Management Systems
|
Mechanical Engineering Plug-In for ASPICE
|

|
|